Collection: DTF Ready to press

Our DTF ready to press design bundles are a great inexpensive way to quickly apply our designs to your garments.

Our premade bundles are great value and offer a saving of around 50% compared to when you buy the transfers from us individually

Our bundles include designs from our popular ranges and include a selection of sizes from 5cm up to 30cmย 

ย 

ย 

Instructions for use:ย 

  1. Lint roll your garment to ensure that any fluff and debris are removedย 
  2. Pre-heat your press (heat will depend on the garment - for cotton, we use approximately 140 Degrees C) and set to medium - firm pressure or 60 PSI
  3. Pre-press your garment to remove any moisture
  4. Press your design for 12 seconds
  5. Wait until the film & garment are cooled andย remove the transfer sheetย 
  6. Apply a Teflon sheet to the top of your design
    Re-press for 12 seconds ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย  ย ย 

Our DTF transfers can also be applied using a domestic iron ensuring the steamย  ย  ย  ย  ย  setting is turned off

All our DTF Transfers are cool-peel, meaning the film & garment need to cool before you remove the transfer sheet. They will not adhere if you attempt to remove them hot-off-the-press.